Daily maintenance and care points for steel structure workshops:
1. After the steel structure workshop is installed, its structure cannot be changed privately, any bolts and other parts cannot be removed, and partitions cannot be added or reduced. If any part needs to be changed, it must be negotiated with the manufacturer, and the manufacturer will determine whether it can be changed. The steel structure must be maintained with paint after about 3 years of use, so as to give the building beauty and safety. The steel structure workshop is connected by steel structure components, so when using electrical equipment, such as wires, wire troughs and wire pipes should be used to isolate them to avoid electric shock accidents.
2. The steel structure workshop must be cleaned and maintained regularly. Under normal circumstances, it needs to be inspected and maintained once a year. When cleaning the exterior wall of the steel structure workshop, it is necessary to be careful not to have messy phenomena. Steel wool, brushes and other abrasive cleaning products cannot be used. When using clean water, it should be rinsed from top to bottom. Branches, leaves and other similar objects on the steel structure workshop should be cleaned up in time to avoid unnecessary trouble caused by backlog. If the surface of the metal plate of the steel structure workshop is damaged, it should be repaired in time to avoid corrosion of the metal plate surface by sun and rain. If necessary, highly elastic nano-materials can be used to protect the metal roof panels, effectively insulate and waterproof them, and save indoor air-conditioning energy.
